ADC42 with USB-Parallel Port Adaptor

Which product is right for your exact requirements
Post Reply
Guest

ADC42 with USB-Parallel Port Adaptor

Post by Guest »

With the ADC42 (single channel) plugged into a USB-Parallel Port Adaptor and set to fast block mode, what is the maximum number of samples (or maximum sample time) when sampling at a fast rate, e.g. 10kHz? thanks.

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko »

Hi and thank you for your post.

I have answered a similar question to this for the ADC11, but my answer will be the same, please have a look at the following link:

http://www.picotech.com/support/viewtop ... highlight=


I hope this helps, let me know if you still do not understand.

Kind regards
Ziko

Technical Specialist

Post Reply