DrDAQ and repeat function

Forum for discussing PicoLog
Post Reply
mdashper
User
User
Posts: 3
Joined: Mon Nov 20, 2006 2:20 pm

DrDAQ and repeat function

Post by mdashper » Tue Apr 24, 2007 3:26 pm

I understand that the repeat function is not available in PicoLog when installed for DrDAQ. I do, however, remember seeing a workaround for this but I cannot remember what it was and I cannot find it in the forum. Can you please post it again.

Martin Dashper

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko » Wed Apr 25, 2007 1:30 pm

Hi and thank you for your post.

What do you mean by repeat function? Could you explain further, what software are you using?

Kind regards
Ziko

Technical Specialist

mdashper
User
User
Posts: 3
Joined: Mon Nov 20, 2006 2:20 pm

DrDAQ and repeat function

Post by mdashper » Wed Apr 25, 2007 2:09 pm

As I stated in my question, I am using PicoLog (exact version I can't remember, but it is a recent one)
By repeat I mean the 'Repeat Immediately' function.

The workaround I half remember is to install the software for another device initially, but I can't remember the details.

Martin

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko » Thu Apr 26, 2007 8:57 am

Hi, I believe I understand what you are looking for.

If you remove the software and install the software again, but this time for a different product, say the 3000s, and then click on the tick box at the bottom (install for other devices), this will install all dlls including that of the DrDaq. Now when you use PicoLog all the features of standard PicoLog will be available.

Hope this helps.
Ziko

Technical Specialist

Post Reply