Combining oscilloscopes (2105)

Forum for discussing PicoScope (version 5)
Post Reply
sonar
Newbie
Posts: 1
Joined: Sat Mar 24, 2007 1:25 pm

Combining oscilloscopes (2105)

Post by sonar »

Hi,
In the 2105 User guide, it is mentioned (in part 3.4.10 Combining oscilloscopes) that, " Note: It is not possible to synchronise the collection of data between PicoScope PC Oscilloscopes that are being used in combination."
Would you please explain it more? what is diffrent bitween a two channel Oscilloscope and two Combined 2105 Oscilloscopes?
Thanks a lot
Sonar

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko »

Hi and thank you for your post.

Using PicoScope software you can only have one unit running, e.g. 2104 on its own or even a 3424 on its own. The fact that a scope( the unit) has 1,2 or 4 channels does not matter. So if you had a 4 channel scope you will see 4 channels, if you have a single channels scope you will only see 1 channel.

Hope this helps.

Ziko
Ziko

Technical Specialist

Post Reply