Test and Measurement Forum

Cannot connect to a device(PS4424)

Post your .Net discussions here

Cannot connect to a device(PS4424)

Postby Dterad » Fri Dec 22, 2017 1:28 pm

Hi,

I installed SDK and downloaded the latest version of example programs for C#.
But, the example programs in "ps4000a" folder can not connect to my device (PicoScope 4424).
For example, "PS4000AStreamingConsole" says "No devices found. Error code : 3", when the program runs.
However, "PS4000CSConsole" can connect to the device and works.
Of course, PicoScope6 software works without any problems.

What should i check ?
Dterad
Newbie
 
Posts: 0
Joined: Fri Dec 22, 2017 12:39 pm

Re: Cannot connect to a device(PS4424)

Postby Martyn » Fri Dec 22, 2017 2:03 pm

Although part of the 4000 series there are two different drivers, ps4000a and ps4000, and the examples reflect these

ps4000a examples are for the 4x25, 4444 and 4824 scopes

ps4000 examples are for the 4x24 and 4262 scopes
Martyn
Technical Support Manager
Martyn
Site Admin
Site Admin
 
Posts: 3110
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Cannot connect to a device(PS4424)

Postby Dterad » Sat Dec 23, 2017 1:57 am

Thank you for your quick response.
I didn't know that.
I'm sorry that I hadn't checked manuals thoroughly.

I will use the PS4000 driver and examples.
thanks again.
Dterad
Newbie
 
Posts: 0
Joined: Fri Dec 22, 2017 12:39 pm


Return to .Net Languages (C#, VB.Net, .)

Who is online

Users browsing this forum: No registered users and 1 guest