Saving Triggered Files Automatically As Jpeg files?

Forum for discussing PicoScope (version 5)
Post Reply
sebastian

Saving Triggered Files Automatically As Jpeg files?

Post by sebastian » Sat May 31, 2003 10:17 pm

Hi there

Im having a little trouble here trying to get my PicoScope to trigger via save Jpeg files automatically... Can this be done? I also recently upgraded to version 5.09.4 thinking it would resolve this issue, but I would still have to go into the program and select each trigger "save as jpg file"

Maybe there is a code I can put into the PSW.ini file I created to save Jpg files automatically?

Any help would be greatly appreaciated.

Thanks
Sebastian

User avatar
markspencer
Site Admin
Site Admin
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Post by markspencer » Mon Jun 02, 2003 7:23 am

Hi Sebastian,

When using the save on trigger option, Picoscope will only save data as a .psd file. To convert them into .jpg's you will have to do this manually.

Best regards,
Regards,

Mark Spencer

Richard Rudd

saving triggered files automatically

Post by Richard Rudd » Tue Jun 24, 2003 8:03 am

Hi,

I've got a similar problem to Sebastian - and I guess the answer is the same(?).

In my case, I'm trying to save a sequence of triggered traces as .txt files, for import into Excel (the traces represent channel response, and I need a 3D plot showing how this evolves over time).

Cheers,
Richard

User avatar
markspencer
Site Admin
Site Admin
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Post by markspencer » Wed Jun 25, 2003 7:27 am

Hi Richard,

You could use the driver that we provide to write the data straight into excel.

You can download the drivers and an example of how to get the data into excel from here.

Best regards,
Regards,

Mark Spencer

Post Reply