Test and Measurement Forum

Serial data decoding

Forum for discussing PicoScope (version 5)

Serial data decoding

Postby Guest » Wed Mar 21, 2007 8:29 pm

Is there a PICO sofware for reading serial communications on a Picoscope?

I would like to check text streams from a uP without a level shifting hardware and terminal prog.

Thanks!
Guest
 

Postby ziko » Thu Mar 22, 2007 4:26 pm

Hi and thank you for your post. We have numerous scopes, depending on your signal that you are measuring this will be the deciding factor.

We normally say for square waves you need to sample at least 10 times the frequency of the input signal. i.e. a 10kHz signal will need to be sampled at 100kS/s. Please have a look at the following links:

http://www.picotech.com/oscilloscope-sp ... tions.html

http://www.picotech.com/applications/os ... orial.html

Hope this helps.

Kind regards
Ziko

Technical Specialist
ziko
Zen Master
Zen Master
 
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Postby Erik » Fri Mar 23, 2007 10:08 am

We currently do not have any software for decoding serial data.
What type of serial protocol do you want to look at and which PicoScope do you have?
Erik
PICO STAFF
PICO STAFF
 
Posts: 53
Joined: Mon Oct 23, 2006 8:16 am
Location: Cambridgeshire, UK


Return to PicoScope 5

Who is online

Users browsing this forum: No registered users and 0 guests