Test and Measurement Forum

Fatal Error 252

Having problems ? let us know the details here

Fatal Error 252

Postby Simon Bubb » Wed Nov 01, 2017 8:21 am

Do you know what a "Fatal Error 252" means?

Its just appeared on a run on a fairly new TC-08 USB, which had been running without any problems for around a week before that point.

Thanks,

Simon
Simon Bubb
User
User
 
Posts: 3
Joined: Tue Oct 31, 2017 3:24 pm

Re: Fatal Error 252

Postby Martyn » Wed Nov 01, 2017 10:19 am

We need more information on where the error occured. Either post some screen shots here, or email them to support@picotech.com
Martyn
Technical Support Manager
Martyn
Site Admin
Site Admin
 
Posts: 2816
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Fatal Error 252

Postby Simon Bubb » Wed Nov 01, 2017 10:22 am

Capture.PNG
Capture.PNG (13.31 KiB) Viewed 176 times
I'm not sure it adds much, but at present all I have is the following
Simon Bubb
User
User
 
Posts: 3
Joined: Tue Oct 31, 2017 3:24 pm

Re: Fatal Error 252

Postby Martyn » Wed Nov 01, 2017 10:50 am

Not sure what would cause this to happen, and we would probably need more details to be able to advise.
However I would suggest looking at sections 6 and 7 in the Self Help Guide , clean out the settings and ensure that the USB is not powering down.
Martyn
Technical Support Manager
Martyn
Site Admin
Site Admin
 
Posts: 2816
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Fatal Error 252

Postby Simon Bubb » Wed Nov 01, 2017 11:35 am

Thanks - will look at this, and get back in touch if it re-occours. (There is a chance it might be unrelated - PC stability possibly questionable).
Simon Bubb
User
User
 
Posts: 3
Joined: Tue Oct 31, 2017 3:24 pm


Return to Getting Started

Who is online

Users browsing this forum: No registered users and 0 guests