Test and Measurement Forum

need to control ~10 adc212 with 1 comp

Post any questions about our parallel port products

need to control ~10 adc212 with 1 comp

Postby newbie » Mon Feb 26, 2007 7:10 pm

how many devices (adc212) will be available if i use 8-port
usb hub or just 2-3 internal pci-usb cards?
newbie
 

Postby Sarah » Tue Feb 27, 2007 9:58 am

Hi

You can use up to 3 ADC-212 units on LPT ports or 4 on USBPP adaptors (only Pico adaptors will work). This is true for Picolog however Picoscope will only support one unit at a time.

Best Regards
Sarah
 

Postby newbie » Tue Feb 27, 2007 2:18 pm

thanks Sarah

1. 3 LPT & 4 usbpp - does it equal to 7 total if i will use approp. "mplexors"?

2. is there any way to extend usbpp ammo to 10 (or twice at least)?

suppose the answer is 2xNo, pity..
newbie
 

Postby Sarah » Tue Feb 27, 2007 3:47 pm

Hi

Unfortunately the answer is 'No' to both. The limits are in the driver and how many units it can support. If you need 10 channels then maybe 3 PS3424 units would work?

Best Regards
Sarah
 

Postby nub » Tue Feb 27, 2007 4:23 pm

i see.. but "they" have already baught a bunch of 212..
thanks You again and sorry for wasting Your energy with a dumb questions..
nub
 


Return to Parallel Port Products

Who is online

Users browsing this forum: No registered users and 0 guests