Test and Measurement Forum

Max Samples on 3424

Post any questions you may have about our current range of oscilloscopes

Max Samples on 3424

Postby CoyoteDavid » Wed Feb 14, 2007 7:19 am

First, let me say you have a great product!

I have a 3424 and am trying to get a long single channel data capture. The specification says that I can get 512K samples with a single channel, yet the most I can seem to get is 250002. I have only channel A enabled, and set the "Max samples per scope trace" to 1000000. I enabled the display for "Number of Samples" in measurements. I observe the following:

1 mS/div ==> 200002 samples (as expected, limited by 20 MHz sample rate)
2 mS/div ==> 200002 samples (should be able to get 400002)
5 mS/div ==> 250002 samples (should be able to get 500002)
10 mS/div ==> 250002 samples (should be able to get 500002)
20 mS/div ==> 250002 samples (should be able to get 500002)

Is the specification incorrect, or am I doing something wrong here?
Thanks,
David
CoyoteDavid
Active User
Active User
 
Posts: 17
Joined: Fri Jan 05, 2007 7:48 am
Location: California

Postby ziko » Wed Feb 28, 2007 4:36 pm

Hi and thank you for your post. Could you send me a screen shot of what you are trying to do?

Kind regards

Ziko
Ziko

Technical Specialist
ziko
Zen Master
Zen Master
 
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots


Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests