2-channel spectrum analyzer functions

Which product is right for your exact requirements
Post Reply
scott miller

2-channel spectrum analyzer functions

Post by scott miller »

1. Can the picoscope software calculate a frequency response?
2. Are any of your units equipped with output signal generators?

User avatar
Site Admin
Site Admin
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Post by markspencer »

Hi Scott,

You can view the frequency response in the spectrum analyser, but you are not able to measure it.

The 200 series (ADC-212, ADC-216, ADC-200) all provide a signal generator.

Best regards,

Mark Spencer

User avatar
Advanced User
Advanced User
Posts: 109
Joined: Wed Sep 25, 2002 9:35 am
Location: Cambridgeshire, UK

Post by matthew »

Hello Scott,

It sounds like you might be trying to measure the full frequency response of a system using a sweeping signal generator? If this is the case, then our current products won't be suitable.

The built in signal generator is only for indication, and there is no facility to synchronize the units with an external sweeping signal generator. You could do this manually yourself by recording a set of discreet measurements, however this can be laborious work.

Sorry I couldn't give you better news (if this is what you were trying to do).

Best Regards,
Matt Everett

Pico Software Engineer

Post Reply