Test and Measurement Forum

2-channel spectrum analyzer functions

Which product is right for your exact requirements

2-channel spectrum analyzer functions

Postby scott miller » Wed May 21, 2003 7:10 pm

1. Can the picoscope software calculate a frequency response?
2. Are any of your units equipped with output signal generators?
scott miller

Postby markspencer » Thu May 22, 2003 10:19 am

Hi Scott,

You can view the frequency response in the spectrum analyser, but you are not able to measure it.

The 200 series (ADC-212, ADC-216, ADC-200) all provide a signal generator.

Best regards,

Mark Spencer
User avatar
Site Admin
Site Admin
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Postby matthew » Tue May 27, 2003 11:32 am

Hello Scott,

It sounds like you might be trying to measure the full frequency response of a system using a sweeping signal generator? If this is the case, then our current products won't be suitable.

The built in signal generator is only for indication, and there is no facility to synchronize the units with an external sweeping signal generator. You could do this manually yourself by recording a set of discreet measurements, however this can be laborious work.

Sorry I couldn't give you better news (if this is what you were trying to do).

Best Regards,
Matt Everett

Pico Software Engineer
User avatar
Posts: 109
Joined: Wed Sep 25, 2002 9:35 am
Location: Cambridgeshire, UK

Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 0 guests