Test and Measurement Forum

A PT100 sensor to be used with a CMM

Post any questions you may have about our current range of USB data loggers

A PT100 sensor to be used with a CMM

Postby azor2005 » Tue Oct 10, 2017 6:42 pm


I'm not familiar with PT100 sensors type, so please advise.
I'm going to use PT-104 Data Logger to monitor actual temperature of CMM (coordinate measuring machine) axes guides (the scales temperature formally).
For my application 0.1C accuracy would be enough.
Can someone suggest a sensor model/type to use which I can screw or glue on the guides?

(I checked PT100 sensors page https://www.picotech.com/data-logger/pt ... ccessories, but can't find any suitable one).

Posts: 0
Joined: Tue Oct 10, 2017 6:01 pm

Re: A PT100 sensor to be used with a CMM

Postby Hitesh » Wed Oct 25, 2017 8:21 am

Hi Alexey,

Please could you e-mail support@picotech.com with a picture of the equipment that you need to attach the PT-100 sensor and we will see if we can assist further.


Technical Support Engineer
Site Admin
Site Admin
Posts: 2749
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Return to USB PC Data Loggers

Who is online

Users browsing this forum: No registered users and 0 guests