Test and Measurement Forum

which type of screwdriver do I need?

Post any questions you may have about our current range of oscilloscopes

which type of screwdriver do I need?

Postby AnalogueMan » Thu Oct 05, 2017 12:18 pm

Purchased the picoscope 2205A with two probes included. But when I want to calibrate a probe,
P6060, I am facing problems when I use an ordinary screwdriver and I do not want to ruin the probe.
Tried to find out which kind of tool I need but without success.
Can somebody tell me what kind of screwdriver I need?
Thanks.
AnalogueMan
Active User
Active User
 
Posts: 18
Joined: Tue Feb 21, 2017 11:25 am

Re: which type of screwdriver do I need?

Postby Hitesh » Fri Oct 06, 2017 10:22 am

Hi AnalogueMan,

There should have been a small tool included with the probes to allow you to do this.

If you have not received this, please e-mail support@picotech.com with your contact details or use a screwdriver with a small flat blade.

Regards,
Hitesh

Technical Support Engineer
Hitesh
Site Admin
Site Admin
 
Posts: 2498
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: which type of screwdriver do I need?

Postby AnalogueMan » Fri Oct 06, 2017 10:43 am

Mea Culpa! I completely overlooked that little plastic bag with that small tool.
Must be my age, sorry :oops:
Thanks for your reply.
AnalogueMan
Active User
Active User
 
Posts: 18
Joined: Tue Feb 21, 2017 11:25 am

Re: which type of screwdriver do I need?

Postby Hitesh » Fri Oct 06, 2017 10:46 am

I suppose it can be overlooked - glad you found it! :lol:
Hitesh

Technical Support Engineer
Hitesh
Site Admin
Site Admin
 
Posts: 2498
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire


Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests