Continuous sampling with PicoScope 2104/2105?

Forum for discussing PicoLog
Post Reply
Guest

Continuous sampling with PicoScope 2104/2105?

Post by Guest » Thu Feb 01, 2007 5:33 pm

Hi,

short question: can PicoLog + PicoScope 2104/2105 be used to perform continuous sampling runs (read: longer than the internal memory)? If so, what is the highest sampling rate supported for this combo?

Thanks
Hannes.

Guest

Post by Guest » Mon Feb 05, 2007 6:50 pm

No information?

I should say that this is actually a pre-sales question, so please let me know if there's a more appropriate section to post it. Thanks.

Sarah

Post by Sarah » Wed Feb 07, 2007 12:25 pm

Hi

Thank you for your post.

Using our Picolog software you can record up to 1 million samples in Real Time Continuous mode. This has a sampling rate limit of 1ms intervals, however has a much longer record time.

Hope this helps

Best Regards

Guest

Post by Guest » Wed Feb 07, 2007 5:16 pm

This would result in over 16 minutes continuous recording with 1 ms sampling rate - more than enough for our application. Sarah, thanks very much!

Post Reply