Externally supplied sample clock

Bill · Post by **Bill** » Fri Jan 26, 2007 9:26 am

Hi,
I do a lot of work on signal analysis of RF signals. I need, if possible, to be able to synchronise the sampling to a 10 MHz reference used by RF signal and arbitrary waveform generators. Is this possible with the 5000 series scopes?

Also, will Linux drivers be available for these units?

Cheers,
Bill

ziko · Post by **ziko** » Tue Jan 30, 2007 4:13 pm

Hi and thank you for your post.

Unfortunately you cannot achieve this with the 5000 series. If you have any further questions please do not hesitate to contact me.

Kind regards