Channel A of 5243A shows wrong waveform

Post any questions you may have about our current range of oscilloscopes
Post Reply
egonotto
Newbie
Posts: 0
Joined: Thu Mar 12, 2015 12:42 am

Channel A of 5243A shows wrong waveform

Post by egonotto »

Hello,

I take a 1kHz waveform from the generator of my PicoScope 5243A and use a BNC tee to connect the generator to channel A and channel B of the PicoScope 5243A

The waveform of channel A is wrong. The low frequencies are damped.

Best regards
egonotto

Gerry
PICO STAFF
PICO STAFF
Posts: 1145
Joined: Mon Aug 11, 2014 11:14 am

Re: Channel A of 5243A shows wrong waveform

Post by Gerry »

Hi egonotto,

Could you post a psdata file of what you are seeing.

Could you tell us:

What happens if you swap the connections to Channel A and Channel B?
What happens if you connect the Sig Gen directly to Channel A and then Channel B?

Regards,

Gerry
Gerry
Technical Specialist

Gerry
PICO STAFF
PICO STAFF
Posts: 1145
Joined: Mon Aug 11, 2014 11:14 am

Re: Channel A of 5243A shows wrong waveform

Post by Gerry »

Hi egonotto,

I just noticed that you posted this elsewhere.

Regards,

Gerry
Gerry
Technical Specialist

Post Reply