Test and Measurement Forum

Channel A of 5243A shows wrong waveform

Post any questions you may have about our current range of oscilloscopes

Channel A of 5243A shows wrong waveform

Postby egonotto » Sat Sep 02, 2017 1:06 am

Hello,

I take a 1kHz waveform from the generator of my PicoScope 5243A and use a BNC tee to connect the generator to channel A and channel B of the PicoScope 5243A

The waveform of channel A is wrong. The low frequencies are damped.

Best regards
egonotto
egonotto
Newbie
 
Posts: 0
Joined: Thu Mar 12, 2015 12:42 am

Re: Channel A of 5243A shows wrong waveform

Postby Gerry » Mon Sep 04, 2017 10:51 am

Hi egonotto,

Could you post a psdata file of what you are seeing.

Could you tell us:

What happens if you swap the connections to Channel A and Channel B?
What happens if you connect the Sig Gen directly to Channel A and then Channel B?

Regards,

Gerry
Gerry
Technical Specialist
Gerry
PICO STAFF
PICO STAFF
 
Posts: 158
Joined: Mon Aug 11, 2014 11:14 am

Re: Channel A of 5243A shows wrong waveform

Postby Gerry » Mon Sep 04, 2017 11:40 am

Hi egonotto,

I just noticed that you posted this elsewhere.

Regards,

Gerry
Gerry
Technical Specialist
Gerry
PICO STAFF
PICO STAFF
 
Posts: 158
Joined: Mon Aug 11, 2014 11:14 am


Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests