EMC-mask

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
driesdendas
User
User
Posts: 2
Joined: Tue Oct 20, 2009 5:41 pm
Location: Belgium

EMC-mask

Post by driesdendas » Thu Aug 31, 2017 7:49 am

Hi,

For reporting i need to add a EMC-mask (max values allowed) as in the picture in the attachement (red is mask, blue signal)
I found an image on https://www.picotech.com/library/oscill ... it-testing what seems to be the same but inverted, but however i don't find a way (yet) to make this mask.
Can someone help me out?

Kind regards
Dries
Attachments
FFT_MASK.jpg
FFT_MASK

Martyn
Site Admin
Site Admin
Posts: 3333
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: EMC-mask

Post by Martyn » Fri Sep 01, 2017 1:22 pm

The red trace in your picture is the solid blue block in our spectrum mask image, the actual mask, so actually both are orientated the same way.

If you watch the video it will help to explain how to create a mask from a known good captured plot, in simple terms capture the plot, then select the mask menu and generate the mask automatically.
Martyn
Technical Support Manager

driesdendas
User
User
Posts: 2
Joined: Tue Oct 20, 2009 5:41 pm
Location: Belgium

Re: EMC-mask

Post by driesdendas » Tue Sep 12, 2017 6:46 am

Solved: I imported the FFT-values in excell and personally for me it was a lot easier to make the graph.

Post Reply