Custom menus problem

Forum for discussing PicoScope (version 5)
Post Reply
Shotton

Custom menus problem

Post by Shotton » Wed May 14, 2003 1:01 am

I have tried to set up a custom menu via the .ini file and have had no luck. I have many .pss files that I use at work and would like to set the menu up.

I followed the help file and nothing changed. My questions are: what directory do I put the .ini file in. And where will I see the change on my picoscope screen once I reboot?

User avatar
markspencer
Site Admin
Site Admin
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Post by markspencer » Wed May 14, 2003 8:01 am

Hi,

The ini file should be called TEST***.ini, where the *** indicates the international dialing code for your country. If you are using English this would be 044, for Germany 049 etc.

Once you have defined your ini file this should be saved in the same directory as Picoscope was installed, for the default installation this would be:

C:\Pico

The .psd or .pss files are found by the script from the PATH declaration, so if you state that:

PATH=C:\Pico\SettingFiles

There should be a directory called 'SettingFiles' inside the Pico directory, that you have created and placed the .pss or .psd files in.

When you re-start Picoscope you will see an extra option 'Examples' for instance, if you have:

Menu=Examples

This will appear on the menu bar between the 'Window' and 'Help' option.

Best regards,
Regards,

Mark Spencer

Post Reply