9211A LAN defect

Post any questions you may have about our current range of oscilloscopes
Post Reply
berry74
Newbie
Posts: 0
Joined: Wed Jun 25, 2014 1:07 pm

9211A LAN defect

Post by berry74 » Tue Aug 08, 2017 9:28 pm

On my 9211A no way to activate the ethernet LAN, switching to USB still works,
but switching to "Yellow" does not even activate the Lan/Eth port LEDs nor leads to a yellow Power-LED blinking, POWER LED just goes immediatedely to green, even if no LAN or USB attached. Followed all procedures with the wonderfull place reset knob. Is this an HW error? or is the firmware stuck? Looks like the ethernet port passed away.
best regards,
Berry

Martyn
Site Admin
Site Admin
Posts: 3345
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: 9211A LAN defect

Post by Martyn » Tue Aug 08, 2017 9:45 pm

Please email support@picotech.com and the team will assist you.
Martyn
Technical Support Manager

Post Reply