Picoscope 6 - Serial Decoding

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
dominic_goh
Newbie
Posts: 0
Joined: Wed Aug 02, 2017 9:23 am

Picoscope 6 - Serial Decoding

Post by dominic_goh » Fri Aug 04, 2017 7:43 am

Hi Picotech,

Do you have a method to automate (with picoscope /a) the export button in the serial decoding window?

I will be testing hundreds of PCBAs in the manufacturing environment every day and will like to find a process to automate the recording of serial decoded data (ARINC 429 and I2C) on every PCBA (when the FW code is running).

Thank you.

Hitesh
Site Admin
Site Admin
Posts: 2829
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Picoscope 6 - Serial Decoding

Post by Hitesh » Fri Aug 11, 2017 1:03 pm

Hi Dominic,

I have looked at the list of automation commands and it doesn't appear to have this feature at the moment.

I will raise a new feature request for our Development Team.

Regards,
Hitesh

Technical Support Engineer

bennog
Active User
Active User
Posts: 33
Joined: Mon Nov 26, 2012 9:16 am
Location: Netherlands

Re: Picoscope 6 - Serial Decoding

Post by bennog » Wed Aug 30, 2017 2:17 pm

Any news on this, I have a need for this also at the moment :D

Also math function from automation. For CAN decoding I first want to subtract A - C and then do the CAN decoding on the math data.

Benno

lab!fyi
Newbie
Posts: 0
Joined: Mon Dec 12, 2016 6:58 pm
Contact:

Re: Picoscope 6 - Serial Decoding

Post by lab!fyi » Wed Aug 30, 2017 5:35 pm

Maybe one could automate via running executable from Alerts on Capture or Buffers full? Executable would be some sort of macro software with all needed clicks and keys recorded. If have not tried this but conceptually should work if find good macro software - quick search shows some promise.

Martyn
Site Admin
Site Admin
Posts: 3333
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Picoscope 6 - Serial Decoding

Post by Martyn » Mon Sep 18, 2017 12:32 pm

This feature will also be required to export the Deep Measure table data from the latest Beta version of the software, as this uses the same code base as the Serial Decoding.
Martyn
Technical Support Manager

lab!fyi
Newbie
Posts: 0
Joined: Mon Dec 12, 2016 6:58 pm
Contact:

Re: Picoscope 6 - Serial Decoding

Post by lab!fyi » Mon Oct 22, 2018 8:04 am

Bump, issue is still in the air:
http://www.eevblog.com/forum/testgear/b ... msg1893938
User cannot automate decoded data export because macro recorder does not see SD window. Also it might be problem that SD/Export does not offer auto naming of export file.

sbabic44
User
User
Posts: 2
Joined: Thu Nov 30, 2017 10:17 pm

Re: Picoscope 6 - Serial Decoding

Post by sbabic44 » Wed Oct 24, 2018 8:05 pm

I also want to mention this would be very nice to have, for both decodes and DeepMeasure.
I would vote for an action in Alarms.

To @lab!fyi : Hi MrWolf!
2N3055

Post Reply