Picoscope 4444 - Cable Length

Post any questions you may have about our current range of oscilloscopes
Post Reply
MikeJames
Newbie
Posts: 0
Joined: Wed Oct 22, 2014 2:57 pm

Picoscope 4444 - Cable Length

Post by MikeJames » Mon Jul 31, 2017 12:02 pm

Hi,

Is the PicoConnect 441 cable available in a 2 metre length?

Regards, Mike.

Martyn
Site Admin
Site Admin
Posts: 3341
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Picoscope 4444 - Cable Length

Post by Martyn » Tue Aug 01, 2017 12:41 pm

Unfortunately not at the present time.
Martyn
Technical Support Manager

bennog
Active User
Active User
Posts: 33
Joined: Mon Nov 26, 2012 9:16 am
Location: Netherlands

Re: Picoscope 4444 - Cable Length

Post by bennog » Tue Aug 01, 2017 3:05 pm

You can build one yourself quite easy.

for the 9 pin D connector
1 = Diff+
2 = Diff-
6 = GND
Between pin 3 and 4 Resistor 4k3 (for TA441 detection)

Benno

MikeJames
Newbie
Posts: 0
Joined: Wed Oct 22, 2014 2:57 pm

Re: Picoscope 4444 - Cable Length

Post by MikeJames » Tue Aug 08, 2017 1:06 pm

Thank Benno,

I measured the cable - there is 74 Ohms between 1 -> Diff+ and 2 -> Diff-, This might be some impedance matching going on...

Regards, Mike.

Post Reply