PicoScope2205MSO fault?

Forum for discussing PicoScope (version 5)
Post Reply
Davepsycho
Newbie
Posts: 0
Joined: Sun Jul 30, 2017 1:32 pm

PicoScope2205MSO fault?

Post by Davepsycho » Sun Jul 30, 2017 1:42 pm

I have a PicoScope2205MSO - never had any problems but in use today suddenly froze display and (probably simultaneously) the power light went off.
On disconnecting and reconnecting USB light appears and device recognised by PC.
Within 3-4 seconds power light flashes then goes off, PC emits disconnect tone.
Any suggestions? known fault? expensive to test/repair?
Or am I missing something obvious?
Thanks

NeilH
PICO STAFF
PICO STAFF
Posts: 45
Joined: Tue Jul 18, 2017 8:28 am

Re: PicoScope2205MSO fault?

Post by NeilH » Tue Aug 01, 2017 12:18 pm

Hi,

Would you be able to post what version of PicoScope 6 software are you're using as well as the OS you're running it on?
Are you using the blue USB cable supplied with scope?

This may also be helpful
PicoScope 6 FAQ
Neil
Technical Support Engineer

Post Reply