Test and Measurement Forum

2205A MSO

Discussion forum for the new Picoscope Linux software

2205A MSO

Postby tmohr » Mon Jul 17, 2017 9:49 pm

Hello,

I think about buying the 2205A MSO for use in Linux.
I installed the latest Linux driver and SW for OpenSuse. Installation went fine.
In the SW I selected the demo device then.

The 4 normal channels work. But I can't see the 16 digital signals an now I wonder if I can use these under Linux if I buy the 2205A MSO.

Will I be able to use them and they are just not available in the demo device?

Or are only analog channels supported in Linux?


Best regards
Torsten
tmohr
Newbie
 
Posts: 0
Joined: Mon Jul 17, 2017 9:41 pm

Re: 2205A MSO

Postby Hitesh » Tue Jul 18, 2017 8:59 am

Hello Torsten,

The digital channels can be enabled in the PicoScope software when a PicoScope MSO device is connected.

The demo device only has analogue channels but I will add to a request for an option for digital channels to be displayed when using the demo device.

Regards,
Hitesh

Technical Support Engineer
Hitesh
Site Admin
Site Admin
 
Posts: 2497
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire


Return to PicoScope for Linux

Who is online

Users browsing this forum: No registered users and 0 guests