ADC-200/100 trigger problem

Scomp · Post by **Scomp** » Sun Dec 10, 2006 11:55 am

Hi,

I am trying to set upp an automatic logging function.
I have an ADC-200/100 and it should be waiting for
a trigg event (1V) to occure and then make a 20 sec
long sampling and write this to a file. After this it
shall start again and wait for a trigg event.
I have tried to set it up but I can not get this to work.
This is how I have been doing:
Recording: Fast block, Repeat immediately
Converter:ADC-200, USB-PP1
ADC200 Block: Time base=655Î¼s, Samples=30000
Trigger: Enable, Rising, Thresh=1V

This is working for one trigg event then it will carry
on immediately without waiting for a trigg event.

How shall I make a setting so it will wait for next trigg event?

Sarah · Post by **Sarah** » Tue Dec 19, 2006 10:49 am

Hi

Thank you for your post.

Can you send your plw file to us at tech@picotech.com ? This will help me look into this further.

Remember to include a link to this post so that we can associate your email with this posting and read the background the the problem again.

Best Regards

Guest · Post by **Guest** » Wed Aug 27, 2008 6:55 pm

Hi

I noticed the same problem.
Do you have a solution ?

Thany you