Test and Measurement Forum

ChA+ChB ; ChA*ChB ; Invert ChA ...

Forum for discussing PicoScope (version 5)

ChA+ChB ; ChA*ChB ; Invert ChA ...

Postby arielmedina61 » Wed Dec 06, 2006 7:44 pm

Is possible to use math functions with chA and chB?

CHA + CHB
CHA * CHB
Invert a channel ..

Thanks,

Ariel.
arielmedina61
Super User
Super User
 
Posts: 21
Joined: Fri Sep 23, 2005 1:17 pm
Location: Buenos Aires-Argentina

ChA+ChB ; ChA*ChB ; Invert ChA ...

Postby davidj » Fri Dec 08, 2006 10:29 am

Hi Aerial,

Thank you for your post.

In PicoLog you could use the Calculated Parameters function that may suit your needs. However, PicoScope does not have any math functions. You will need to write your own software to facilitate this.
Regards,
David
davidj
Site Admin
Site Admin
 
Posts: 43
Joined: Wed Oct 11, 2006 8:50 am
Location: St. Neots, Cambs, UK

Postby alan » Fri Dec 08, 2006 10:52 am

Hi,

You can easily invert a channel in PicoScope by setting a custom range. For example if you select

1000 -1000
0 0
-1000 1000

As the scaling then you have a 1V range that is inverted.

Regards
Alan
alan
Site Admin
Site Admin
 
Posts: 171
Joined: Thu May 25, 2006 8:02 am

Postby arielmedina61 » Fri Dec 08, 2006 11:06 am

David:
Thank you for your post.

Regards,

Ariel.
arielmedina61
Super User
Super User
 
Posts: 21
Joined: Fri Sep 23, 2005 1:17 pm
Location: Buenos Aires-Argentina

Postby arielmedina61 » Fri Dec 08, 2006 11:09 am

Hi Alan

Your suggestion is very ingenious!!!!

Thank you.


Ariel.
arielmedina61
Super User
Super User
 
Posts: 21
Joined: Fri Sep 23, 2005 1:17 pm
Location: Buenos Aires-Argentina


Return to PicoScope 5

Who is online

Users browsing this forum: No registered users and 0 guests