Test and Measurement Forum

Crash in supplied ps3000Acon project

Post your C and C++ discussions here

Crash in supplied ps3000Acon project

Postby rs20 » Wed May 17, 2017 10:21 am

Hardware: 3406D MSO, Windows 10 64-bit.

Steps to reproduce: Run ps3000acon, type 'D' (Digital Ports menu), then 'T' (Digital Block Triggered).

Outcome:
crash.png


Oscilloscope is working fine with the Picoscope 6 software, so it seems to be a software bug.
rs20
Newbie
 
Posts: 0
Joined: Wed May 17, 2017 10:14 am

Re: Crash in supplied ps3000Acon project

Postby Hitesh » Wed May 17, 2017 10:25 am

Hi rs20,

Have you tried the ps3000a C Console example from our GitHub repository?

Regards,
Hitesh

Technical Support Engineer
Hitesh
Site Admin
Site Admin
 
Posts: 2514
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Crash in supplied ps3000Acon project

Postby rs20 » Wed May 17, 2017 10:59 pm

Hi Hitesh,

Thanks for the prompt response! I've since tried using the GitHub link you provided, which entailed upgrading from Visual Studio 2013 to VS 2017 as well. When all the dust settled, the Digital Block triggered demo works without crashing, so we can consider this issue fixed!
rs20
Newbie
 
Posts: 0
Joined: Wed May 17, 2017 10:14 am

Re: Crash in supplied ps3000Acon project

Postby Hitesh » Thu May 18, 2017 8:18 am

Hi rs20,

Good to hear that the example is working! :D

Regards,
Hitesh

Technical Support Engineer
Hitesh
Site Admin
Site Admin
 
Posts: 2514
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire


Return to C and C++

Who is online

Users browsing this forum: No registered users and 0 guests