problem with usb-port for picoscope

Forum for discussing PicoScope (version 5)
Post Reply
Posts: 1
Joined: Tue Nov 21, 2006 5:43 pm
Location: Mumbai

problem with usb-port for picoscope

Post by ajjoshi » Tue Nov 21, 2006 6:12 pm

I was using ADC 100 (driver V2.9 -- LPT1 -- pico.sys V1.5) with picoscope(5.07.4) and it was working very fine.

Now, I have bought new laptop, which does not have a parallel port. So, I purchased a PICO usb-parallel-port. Also, I installed new picoscope(5.13.0), which came along with the usb-parallel-port.

Now when I use adc 100 (driver 3.0 -- usb-ppt1 -- picopp.sys V1.8) and pico usb-parallel-port for picoscope(5.13.0), I get following errors:
1. the signals stops abruptly while collecting the data
2. when i use 2 channels, the 2 signals go out of synchronization.

please help me for this
Aniruddha Joshi

Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael » Mon Nov 27, 2006 12:41 pm

Hello and thank you for your post.

You will need to download the latest version of our software from our website. Please visit:

Best regards,
Michael - Tech Support
Pico Technology
Web Support Forum

Post Reply