Just a thanks!

Post your Linux discussions here
Post Reply
tonedef
Newbie
Posts: 0
Joined: Sat May 06, 2017 7:29 pm

Just a thanks!

Post by tonedef »

I really appreciate that pico is supporting linux. It was a primary reason for me purchasing your scope. I code on a lot of open source frameworks and I build on a lot of open source hardware, both for commercial and personal use. Linux is more practical for many of my applications, so having your software being able to run in my linux dev environment makes my work so much more fluid. Thank you!

I will definitely recommend your scopes to my circle. Hardware is top-notch, probes are better than most of the cheap junk you get in a bundle, and the software offers significantly more than you get in even some higher end stand-alone units.

Martyn
Site Admin
Site Admin
Posts: 4483
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Just a thanks!

Post by Martyn »

Keep an eye out over the next few weeks as a new version of PicoScope 6 for Linux is due for release :)
Martyn
Technical Support Manager

GlenWalker
Newbie
Posts: 0
Joined: Thu May 11, 2017 12:48 pm

Re: Just a thanks!

Post by GlenWalker »

Thanks that is great news!

Will the new Linux version have the same functionality as the current Windows version (6.12.7.2687)?

I'm specifically interested if it will have the ability to create custom probes...

Martyn
Site Admin
Site Admin
Posts: 4483
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Just a thanks!

Post by Martyn »

I haven't seen the release candidate so can't verify what has been added.
Martyn
Technical Support Manager

Post Reply