Test and Measurement Forum

FFT Window

Forum for discussing PicoScope version 6 (non-automotive version)

FFT Window

Postby JohanvB » Tue May 02, 2017 1:08 pm

Hello,

Is there a possibilty to delete one window of the spectrum analysis in a range of windows, for example a start-up of a device, to become a better peak hold graph?

Thank you for the answer.
JohanvB
Newbie
 
Posts: 0
Joined: Tue May 02, 2017 1:00 pm

Re: FFT Window

Postby Gerry » Thu May 04, 2017 11:21 am

Hi JohanvB,

If I understand you correctly, you are capturing multiple buffers in Spectrum mode and using peak hold across the buffers which is getting distorted by an uncharacteristic waveform in the first window as a result of the signal captured immediately after the trigger point. So, you wanted to know if you could somehow reject the first waveform from the Peak hold calculation.

Unfortunately, there is no current way to do this in our software.

Regards,

Gerry
Gerry
Technical Specialist
Gerry
PICO STAFF
PICO STAFF
 
Posts: 152
Joined: Mon Aug 11, 2014 11:14 am

Re: FFT Window

Postby JohanvB » Thu May 04, 2017 7:26 pm

Thank you Gerry. I have been searching and didn't find it eather.
JohanvB
Newbie
 
Posts: 0
Joined: Tue May 02, 2017 1:00 pm


Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 0 guests