if I want to put a threshold of 30mV into the "adc_set_trigger" func
,how should I scale it with the ADC count?
and can you explain me how to use the adc200_set_timebase func in a more detailed way than in the help file?
ADc_count
-
- Advanced User
- Posts: 656
- Joined: Thu Jul 07, 2005 12:41 pm
- Location: St Neots, Cambridgeshire
Hello,
The set trigger function will work to the settings of the active channel chosen as the trigger source. So ChA set at ±20v will set the ADC count on the set trigger function to ±20v.
THe set timebase function only asks for one variable from you. YOu will need to declare the sample time as a pointer and check the return when you call the function. The timebase variable will be from 0-19 which starts with the fastest sampling rate which the divides by powers of 2.
Best regards,
Michael
The set trigger function will work to the settings of the active channel chosen as the trigger source. So ChA set at ±20v will set the ADC count on the set trigger function to ±20v.
THe set timebase function only asks for one variable from you. YOu will need to declare the sample time as a pointer and check the return when you call the function. The timebase variable will be from 0-19 which starts with the fastest sampling rate which the divides by powers of 2.
Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum
Pico Technology
Web Support Forum