DrDAQ Datalogger not detected

Fantaa · Post by **Fantaa** » Wed Apr 12, 2017 5:47 pm

Moin,

I wasn't using my DrDAQ for a while. Now I have something to measure. So I pluged in the USB cable into my linux computer (it is the same I used before) but picoscope 6.11.13.3 (installed via "apt-get" last year) does not recognize the device: No suitable device found. The data logger is found by lsusb:

Code: Select all

renner@solaris:~$ lsusb -vs 002:006

Bus 002 Device 006: ID 0ce9:1014 Pico Technology 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x0ce9 Pico Technology
  idProduct          0x1014 
  bcdDevice            0.02
  iManufacturer           1 Pico Technology   
  iProduct                2 PICO DEVICE       
  iSerial                 0 
  bNumConfigurations      2
.
.
.

I changed the USB cable and installed the Software to a windows computer - with the same result. There is red LED on the PCB, it is blinking sometimes, sometimes it is lit continuously. I wasn't able to find out why.

Any hint? Thanks!

Post by **Martyn** » Tue Apr 18, 2017 9:26 am

Using the Windows version, can you check through the first three sections of the Frequently Asked Questions and send us the trace.xml file.

Test & Measurement Forum

DrDAQ Datalogger not detected

DrDAQ Datalogger not detected

Re: DrDAQ Datalogger not detected