Error Message by trying the PS2000 Block example

Post your LabVIEW discussions here
Post Reply
scju
Newbie
Posts: 0
Joined: Wed Apr 12, 2017 6:08 am

Error Message by trying the PS2000 Block example

Post by scju »

Hey Guys,

I'm using a PicoScope 2206b, the SDK and the software are installed. I wanted to start with the PS2000.vi example from the "PicoScope2000ExampleBox". So every time I try to run the example I receive following error:

An error occurred while trying to initialize the unit. Attempt to disconnect and reconnect the unit to the computer
(I reconnected but it didn't helped)

anyone some ideas what can be done to fix this error ?

Greetings,
Julian
Top
Hitesh
Advanced User
Advanced User
Posts: 2856
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Error Message by trying the PS2000 Block example

Post by Hitesh »

Hi Julian,

The PicoScope 2206B uses the API functions from the ps2000a driver. Please use the examples from the ps2000a folder in our GitHub repository.

Please e-mail support@picotech.com and we can provide you with updated drivers. We will need to know which version of LabVIEW you are using and whether it is 32-bit or 64-bit.

Regards,
Hitesh

Software Dev. Engineer
Top
Post Reply

Return to “LabVIEW”