Time between cursors?

Having problems ? let us know the details here
Post Reply
kmtsp
Newbie
Posts: 1
Joined: Fri Apr 07, 2017 5:54 am

Time between cursors?

Post by kmtsp » Fri Apr 07, 2017 5:56 am

Dear all,
How can I measure time between two cursors on oscillo on PicoScope6?

Martyn
Site Admin
Site Admin
Posts: 3301
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Time between cursors?

Post by Martyn » Fri Apr 07, 2017 6:17 am

When you pull the cursors on to the display a box will pop up showing the time at the cursor, and difference between them.

Make sure that you use the cursors from the bottom left hand side of the display, small white square, not the phase rulers from the bottom right, green circle.
Martyn
Technical Support Manager

Post Reply