Test and Measurement Forum

Allow longer names in digital screen

Forum for discussing PicoScope version 6 (non-automotive version)

Allow longer names in digital screen

Postby tonyt » Wed Apr 05, 2017 2:08 am

If you rename a digital channel, it will only display the first 3 characters. If I rename channels to data1 and data2 then the channels will display dat and dat! I would also like to rename the digital channel to /reset to indicate active low, but this is not possible because '/' is a special character.

An improvement is to allow the user to double click on the channel name in the digital window and change its name directly instead on navigating to Select Digital Channels - then double clicking on channel name and change the order of the digital channels directly in the digital window.

thanks tonyt

PC Oscilloscope software version: 6.12.7.2687
Model: PicoScope 3204D MSO
Attachments
improvments logic names.PNG
improvments logic names.PNG (5.32 KiB) Viewed 267 times
tonyt
Newbie
 
Posts: 0
Joined: Thu Sep 17, 2015 6:45 am

Re: Allow longer names in digital screen

Postby Martyn » Wed Apr 05, 2017 6:42 am

Thank you for the feedback. There is already a feature request related to this area so I will add your suggestions to the melting pot.
Martyn
Technical Support Manager
Martyn
Site Admin
Site Admin
 
Posts: 2781
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Allow longer names in digital screen

Postby blachanc » Tue May 02, 2017 8:19 pm

And for the reference(2013 & 2014):

topic11887.html#p33405

topic13459.html#p38879

Ben
blachanc
Newbie
 
Posts: 1
Joined: Fri Feb 01, 2013 2:49 pm


Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 0 guests