Test and Measurement Forum

INVALID_TIMEBASE with four active channels

Post your C and C++ discussions here

INVALID_TIMEBASE with four active channels

Postby CTA » Thu Mar 23, 2017 3:59 pm

I'm using a Pico 6403D and I want to record waveforms of about 5us length.
When I setup the scope with all four channels set active and a using sampling rate of 1,25GS/s I always get a INVALID_TIMEBASE. (If go down to 0.675GS/s the error still occurs!)

Is there some limitation that hits my setup?
CTA
Newbie
 
Posts: 0
Joined: Thu Mar 23, 2017 3:46 pm

Re: INVALID_TIMEBASE with four active channels

Postby Martyn » Thu Mar 23, 2017 9:04 pm

We would need to see the code to understand how you are setting up the scope.
Martyn
Technical Support Manager
Martyn
Site Admin
Site Admin
 
Posts: 2746
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots


Return to C and C++

Who is online

Users browsing this forum: No registered users and 0 guests