PreTrigger conditions

Which product is right for your exact requirements
Post Reply

PreTrigger conditions

Post by Ham » Thu Oct 26, 2006 2:05 pm

Hi there,
I have a question about the pre-triggering possibilities of your devices.
We would like to observe our machine over months (voltages from 5 to 30 Volt) and then when the failures appears, it should be possible to "watch back" for at least 20min (at least 1kS). Is this possible with your devices without generating huge log files ??
Is it also possible to have a oscilloscope or logger with 4 channels and a external trigger ??
Can be set, for each channel, an own trigger condition ??
Thank you :D

Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael » Thu Nov 02, 2006 9:14 am


Thank you for your post.

The PicoLog software will allow you to sample on trigger. This will allow you to save only what you are looking for.

To acquire with a different trigger on each channel, you will have to wait for the next version of PicoScope. Users of automotive scopes can see this already in PicoScope 6.0(beta).

Best regards,
Michael - Tech Support
Pico Technology
Web Support Forum

Post Reply