ADC11/12 USB

Post any questions you may have about our current range of USB data loggers
Post Reply
Spliff

ADC11/12 USB

Post by Spliff »

I have been using an ADC11/12 usb very sucessfully for 4 months to log 9 voltage channels. Suddenly all channels are reading 9.999 volts ( even ones not connected) in my vb software and are just asterix's in Picolog. Yesterday unplugging the USB lead seemed to clear the fault, fault reappeared this morning, this time changing PC and usb lead didn't solve problem. Have checked all input voltages and they seem to be normal. Any suggestions would be most gratefully recieved.

Michael
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael »

Hello Guest,

THank you for your post.

We have not had reports of this problem before. Have you downloaded and installed the latest software?

www.picotech.com/software.html

Please try this and let me know how things go.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum

Post Reply