Rapid Trigger Mode 10 Waveform Limit

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
nf6z
Newbie
Posts: 0
Joined: Thu Feb 02, 2017 8:21 am

Rapid Trigger Mode 10 Waveform Limit

Post by nf6z »

When I set trigger mode to rapid, only 10 waveforms can be collected. I want to get an average measurement from :cry: 1000 traces quickly. The total trace length is 500 ns and there are only 125 samples. I am using the latest version of PiecoScope 6 under Windows 10 with a 5244B scope.
Top
Martyn
Site Admin
Site Admin
Posts: 4499
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Rapid Trigger Mode 10 Waveform Limit

Post by Martyn »

By default the rapid capture is set to 10 in the trigger toolbar, try this file
rapid1000.psdata
1000 waveform rapid capture
(225.54 KiB) Downloaded 362 times
which is set up how you have requested.
Martyn
Technical Support Manager
Top
Post Reply

Return to “PicoScope 6 for Windows”