Test and Measurement Forum

Rapid Trigger Mode 10 Waveform Limit

Forum for discussing PicoScope version 6 (non-automotive version)

Rapid Trigger Mode 10 Waveform Limit

Postby nf6z » Wed Feb 22, 2017 9:05 pm

When I set trigger mode to rapid, only 10 waveforms can be collected. I want to get an average measurement from :cry: 1000 traces quickly. The total trace length is 500 ns and there are only 125 samples. I am using the latest version of PiecoScope 6 under Windows 10 with a 5244B scope.
Posts: 0
Joined: Thu Feb 02, 2017 8:21 am

Re: Rapid Trigger Mode 10 Waveform Limit

Postby Martyn » Thu Feb 23, 2017 6:52 am

By default the rapid capture is set to 10 in the trigger toolbar, try this file
1000 waveform rapid capture
(225.54 KiB) Downloaded 42 times

which is set up how you have requested.
Technical Support Manager
Site Admin
Site Admin
Posts: 2943
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 0 guests