Test and Measurement Forum

ADC - 24 Digital outputs not working

Post your LabVIEW discussions here

ADC - 24 Digital outputs not working

Postby TSmart » Tue Feb 21, 2017 4:35 am

Hi,
I have recently switched using PicoLog 1216 to an ADC-24 and have been having trouble operating the digital outputs of the logger. No errors appear and the program continues to retrieve data after calling HRDLSetDigitalIOChannel. Also all outputs returned from HRDLSetDigitalIOChannel are as expected however the voltage at the pins does not appear to switch to high. Any sample codes that control the digital outputs or any other advice would be of great help.
Cheers
TSmart
Newbie
 
Posts: 0
Joined: Tue Feb 21, 2017 4:19 am

Re: ADC - 24 Digital outputs not working

Postby TSmart » Wed Feb 22, 2017 3:28 am

After following the digital output function with a HRDLGetUnitInfo function copied from a sample from a different thread I found that one of my parameters had been set up incorrectly. All seems to be working correctly now. Hope this helps anyone facing similar issues.
TSmart
Newbie
 
Posts: 0
Joined: Tue Feb 21, 2017 4:19 am

Re: ADC - 24 Digital outputs not working

Postby Martyn » Wed Feb 22, 2017 7:04 am

Thank you for updating us, good to hear it is working now :)
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2520
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots


Return to LabVIEW

Who is online

Users browsing this forum: No registered users and 0 guests