USB Printing error

Forum for discussing PicoLog
Post Reply
dynalogic
Newbie
Posts: 1
Joined: Tue Oct 10, 2006 9:53 am

USB Printing error

Post by dynalogic » Tue Oct 10, 2006 12:58 pm

Hi,

I have a ADC-11 USB Logger, a HP 5150 inkjet printer and freshly installed Win98se. The printer is installed correctly, printing test pages ok and from other apps such as excel on the computer. However when trying to print through the PICO software the following error appears: "Error writing to USB001 for the printer (HP DeskJet 5100). Unknown system error. Restart windows"

Any advice much appreciated.

Thanks in advance

Michael
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael » Wed Oct 11, 2006 9:32 am

Hello,

This is difficult as it appears to be related to your system. Firstly, is your printer connected by USB? Are yo using a hub for connection?

Basicly it sounds like the USB port is being occupied by either the ADC11 or the printer.

Please let me know how you get on.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum

stevlena
Newbie
Posts: 1
Joined: Fri Jun 12, 2009 11:16 am

Post by stevlena » Thu Jun 18, 2009 9:24 am

What colour cartridges make red print in an inkjet printer?
I have two same model inkjet printers, one of them isn't printing out reds correctly, so I must have a bad cartridge. So, what out of black, yellow, magenta, cyan, light magenta, and light cyan is likely to be the culprit?
_______________
keyword research ~ keyword tool ~ keyword tracking ~ affiliate elite

Post Reply