Rising/falling edge time

Post your .Net discussions here
Post Reply
mosine
Newbie
Posts: 0
Joined: Thu Feb 09, 2017 2:03 pm

Rising/falling edge time

Post by mosine » Fri Feb 17, 2017 1:03 pm

Hi,
I need an information.
I read my data (block.txt) correctly.
Now, I need to know the rising/falling edge time of my square wave. I can calculate it by time column of my data.
Is there another method ? By API?

Thanks in advance.

Hitesh
Site Admin
Site Admin
Posts: 2806
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Rising/falling edge time

Post by Hitesh » Tue Feb 21, 2017 9:36 am

Hi mosine,

There isn't an API function provided by any of our drivers to return a rise time so it would be a case of finding a third party library that can do this or implementing your own algorithm.

MathWorks MATLAB also provides a function to find the rise time via Signal Processing Toolbox.

Please note that Pico Technology is not responsible for the content of external sites.

Regards,
Hitesh

Technical Support Engineer

Post Reply