Use multiple ruler pairs

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
ckunert
User
User
Posts: 3
Joined: Fri Oct 21, 2016 6:18 am

Use multiple ruler pairs

Post by ckunert » Mon Feb 06, 2017 5:58 am

Hello,

I am wondering if there is a more elegant way to perform multiple measurements on the same waveform.
I currently want to measure high and low pulsewidth of my signal and use the measurement statistics (min, max, avg) too.

My signal has multiple pulse I want to know about.

Currently my option to do this with picoscope is to add one view with the same traces for every pulse I want to measure and then add the measurement and shift the rulers.

I think it would be nice to add more rulers (different shapes?) and then assign my measurement "between rulers" to rulerpair C, another measurement (the same type) to rulerpair D...

Then I can use my one big view instead of having 9 small ones.

Hitesh
Site Admin
Site Admin
Posts: 2812
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Use multiple ruler pairs

Post by Hitesh » Mon Feb 06, 2017 10:28 am

Hi ckunert,

I have added your comments to an existing feature request.

The only option for now is to use multiple scope views.

Regards,
Hitesh

Technical Support Engineer

ckunert
User
User
Posts: 3
Joined: Fri Oct 21, 2016 6:18 am

Re: Use multiple ruler pairs

Post by ckunert » Mon Feb 06, 2017 10:34 am

Ok, thank you for your quick reply.

Post Reply