Test and Measurement Forum

Pi TC-08

Discussion forum for the new Picoscope Linux software

Pi TC-08

Postby shochgreb » Fri Feb 03, 2017 11:09 am

Hello

I have successfully followed the instructions to download the libraries for the TC-08 on the R-Pi, and successfully run the USB test to connect to the unit.

I am looking for a C/C++ sample programme (or python ideally) to access the unit, not necessarily on linux, so I can save time rather than starting from scratch.

Thank you.

Simone
U. Cambridge
shochgreb
Newbie
 
Posts: 0
Joined: Fri Feb 03, 2017 8:43 am

Re: Pi TC-08

Postby Hitesh » Mon Feb 06, 2017 10:17 am

Hello Simone,

Please find below the files for a C Console application:

USB TC08 Linux.zip
USB TC-08 C console example
(5.07 KiB) Downloaded 24 times

You will need to have the autoconf and libtoolize packages installed.

To build the example, please use the commands:

Code: Select all
sudo ./autogen.sh
sudo make

Hope this helps.
Hitesh

Technical Support Engineer
Hitesh
Site Admin
Site Admin
 
Posts: 2386
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire


Return to PicoScope for Linux

Who is online

Users browsing this forum: No registered users and 0 guests