Calculate help !!

Forum for discussing PicoLog
Post Reply
Posts: 1
Joined: Tue Sep 26, 2006 11:51 am

Calculate help !!

Post by funnel » Tue Sep 26, 2006 12:02 pm

Hi there

I am using picolog with a ads16 and it work fine, I am logging some flow from a flow meter on chanel A and would like to have a calculation there remember the lowest value from channel A, let say I am logging over a night, I log every sec. the flow have been up to 250 liter / minut and have been down to 4 liter / minut, what I want is a calculated parameter say 4 liter / min, and it would show this value until the flow go under 4 liter / min, But how do I set up the calculation for this,


Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael » Fri Sep 29, 2006 10:18 am


THank you for your enquiry.

You will need to know the upper and lower limits of your flow meters. You can then add a graph range to accomodate this range and use a formatted value.

If you require further information or help, please post your flow meter details and any other relevant information. I will try to help.

Best regards,
Michael - Tech Support
Pico Technology
Web Support Forum

Post Reply