Test and Measurement Forum

CAN FD decoder for non automotive 2000 series

Forum for discussing PicoScope version 6 (non-automotive version)

CAN FD decoder for non automotive 2000 series

Postby babu795 » Thu Jan 19, 2017 1:23 pm

Hi,
it would be very helpful to have a CAN FD decoder in the latest PicoScope software for non automotive 2000 series scopes.

Is there a schedule for that?

Thank you and best regard.

Bob Cephus.
babu795
Newbie
 
Posts: 0
Joined: Tue Jan 17, 2017 1:52 pm

Re: CAN FD decoder for non automotive 2000 series

Postby Hitesh » Fri Jan 20, 2017 12:10 pm

Hi Bob,

There is an existing feature request for CAN FD decoding but no timescales on implementation as yet.

If you do have any example psdata files of CAN FD signals, please send them to support@picotech.com as this will be useful for testing.

Regards,
Hitesh

Technical Support Engineer
Hitesh
Site Admin
Site Admin
 
Posts: 2431
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: CAN FD decoder for non automotive 2000 series

Postby alan » Mon Jan 23, 2017 8:58 am

Just to add a bit more info to the reply from Hitesh. CAN FD is one of the decoders we are working on at the moment. It may be a few months however before it makes it into a full release. When it does it will be available for all PicoScope users free of charge.

If any customers are using CAN FD at the moment and can help us by supplying sample files (different real world data always helps us as different setups have different amounts of noise etc) then we can make sure they get an early beta release.

Regards
Alan
alan
Site Admin
Site Admin
 
Posts: 177
Joined: Thu May 25, 2006 8:02 am


Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 1 guest