PicoScope 2204 and Matlab

Post your MATLAB discussions here
Post Reply
Posts: 0
Joined: Tue Jan 17, 2017 9:29 pm

PicoScope 2204 and Matlab

Post by FrankBarnet » Wed Jan 18, 2017 8:02 am

We have a few PicoScope 2204 in our lab Which I am trying to interface to Matlab, to be used as an ADC input.

The Mathlab version we have is R2016a, I am also new to programing in Matlab.

Is there any document available describing the above in details?


Advanced User
Advanced User
Posts: 2856
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: PicoScope 2204 and Matlab

Post by Hitesh » Wed Jan 18, 2017 4:53 pm

Hi Frank,

Could you please e-mail support@picotech.com indicating if you are using MATLAB 2016a on Windows or Linux platforms and we can provide you with an updated Instrument Driver package if you have Instrument Control Toolbox as well as drivers.

If you are using MATLAB 2016a on Windows PCs, then I would recommend installing the PicoSDK 10.6.10 (64-bit) from our Downloads page.

Also, please install the PicoScope Support Toolbox (you can do this via the Add-On Explorer in MATLAB).


Software Dev. Engineer

Post Reply