Connecting into a microphone

Post any questions about our parallel port products
Post Reply
rwylde

Connecting into a microphone

Post by rwylde » Thu Sep 14, 2006 5:11 pm

Hi there - I am using the ADC-42 to try and measure the frequency of a sound source. I am unclear of what I can use to connect from the ADC into a microphone - is there some kind of connecter that will allow me to do this?

rwylde

Post by rwylde » Thu Sep 14, 2006 7:15 pm

I should add that the frequency changes are not going to be more than 1.5Hz - will this be possible to record?

Michael
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael » Mon Sep 18, 2006 11:15 am

Hello Guest.

The ADC42 has a BNC connector, you will need to build or source a cable to connect your microphone.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum

Post Reply