Test and Measurement Forum

ADC11/12 with temperature and humidity sensors

Which product is right for your exact requirements

ADC11/12 with temperature and humidity sensors

Postby Guest » Tue Sep 12, 2006 12:30 pm

I’m looking to improve an automatic test device for one of our products. We are measuring air pressure, ozone and some voltages. I selected an ADC11/12 and I like to have the following information:
1 Do you have a temperature and humidity sensor that can be used for the ADC11/12 ? It is only for the environmental data.
2 Does the software support saving to a TXT or CSV file every second and once per ten seconds ?

Many thanks wimb

Postby Sarah » Wed Sep 13, 2006 11:24 am


Thank you for your post.

We do not have any sensors for temperature or humidity which can directly interface to the ADC-11. Instead I recommend buying the Humidiprobe as this will measure both of these parameters and can be used at the same time as the ADC-11.

Our software does not support the saving options that you mention. You would need to perform this manually or use the repeat immediately function and save as plw files.

Best Regards

Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 1 guest